cancel
Showing results for 
Search instead for 
Did you mean: 
Create Post
Level 12

Configuring J-Flow (First Time)

Jump to solution

Hello,

We've got a couple Juniper J-Series routers that we just got the J-Flow license for.  I'd like to configure them to export to our NTA server.   I don't have a lot of experience on the J's but I have NO experience with J-Flow.  Anyone out there have it working that wouldn't mind giving me some hints on where to start. 

Thanks!
Eric

1 Solution

Hi Eric--

I did some research and found the following link that might help you:

http://www.gossamer-threads.com/lists/nsp/juniper/17935

Let me know if this helps.

Marie

View solution in original post

0 Kudos
8 Replies
Level 9

What model are you trying configure flow on?

 

On the 4200 it's SFlow

set protocols sflow collector x.x.x.x
set protocols sflow collector udp-port 5600
set protocols sflow interfaces ge-0/0/0.0
set protocols sflow polling-interval 20
set protocols sflow sample-rate 1000

0 Kudos

We've got J-6350's running JUNOS 8.5.  I tried those commands but sflow wasn't available.

0 Kudos

Looks like Juniper licenses J-flow for an additional charge per device.

0 Kudos

We have the licenses installed and they show that they're available.

0 Kudos

Thanks for the post.  I think I found that before and it doesn't work, that guide is for the E-Series router not the J-Series.  I was striking out finding documentation for the J-Series.

0 Kudos

Hi Eric--

I did some research and found the following link that might help you:

http://www.gossamer-threads.com/lists/nsp/juniper/17935

Let me know if this helps.

Marie

View solution in original post

0 Kudos

That looks good, I'll try it out!

Thanks!

0 Kudos