This poller will allow you to monitor an Emerson/Liebert-NX model. I created this to alert me when the UPS is overloaded and when its running on battery power. Polls output power per leg (three legs). Polls status such as normal, on battery, etc. Special Device Data CLICK TO GRAPH POLLER NAME CURRENT STATUS LAST POLLED UPS - Liebert Output_Load_L1 74 % 05:10 PM Output_Load_L2 67 % 05:10 PM Output_Load_L3 80 % 05:10 PM Output_Source normal(3) 05:10 PM Event Summary LAST MONTH 1 Node Down 1 Node Up 1 Node Added 1 Node Rebooted 3 Interface Added 2 Interface Removed 1 Node Changed Node Details Node Status Node status is Up. IP Address Dynamic IP No Machine Type Emerson Computer Power DNS System Name -LIEBERT-NX Description MAIN UPS Location 2ND FLOOR SERVER ROOM Contact Last Boot Thursday, August 30, 2007 12:39 PM Operating System IOS Image Average Response Time & Packet Loss Active Alerts ALL TRIGGERED ALERTS Polling Details Polling Engine MNDCIT01US Polling Interval 10 seconds Next Poll 05:22 PM Statistics Collection 15 minutes Enable 64 bit Counters Yes Rediscovery Interval 60 minutes Next Rediscovery 06:02 PM Last Database Update 04-Sep-07 05:22 PM Availability Statistics PERIOD AVAILABILITY Today 100.000 % Yesterday 100.000 % Last 7 Days 99.974 % Last 30 Days 99.974 % This Month 100.000 % Last Month 99.922 % This Year 99.974 % Output_Load_L1 - Linear Gauge Output_Load_L2 - Linear Gauge Output_Load_L3 - Linear Gauge Average Response Time & Packet Loss TODAY Current Percent Utilization of each Interface STATUS INTERFACE TRANSMIT RECEIVE Up 0 % 0 % Min/Max Average CPU Load TODAY

This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.

You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

Emerson/Liebert UPS Poller - Battery Status and Power Output % per Leg.

FormerMember over 16 years ago

This poller will allow you to monitor an Emerson/Liebert-NX model.

I created this to alert me when the UPS is overloaded and when its running on battery power.

Polls output power per leg (three legs).

Polls status such as normal, on battery, etc.

Special Device Data
CLICK TO GRAPH

Event Summary
LAST MONTH

Node Details

Average Response Time & Packet Loss

Active Alerts
ALL TRIGGERED ALERTS

Polling Details

Availability Statistics

Output_Load_L1 - Linear Gauge

Output_Load_L2 - Linear Gauge

Output_Load_L3 - Linear Gauge

Average Response Time & Packet Loss
TODAY

Current Percent Utilization of each Interface

STATUS			INTERFACE	TRANSMIT		RECEIVE
	Up			0 %		0 %

Min/Max Average CPU Load
TODAY

Leibert.CustomMIBPollers