Node does not respond with the supplied read write snmpv3 credentials

What the router cisco model ?

Its a Cisco 1841 model running the following:

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 15.1(4)M4

I think this is link can help you

http://www.loriotpro.com/ServiceAndSupport/How_to/howto_snmpv3_cisco_EN.php

or

http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf014.html

After you type in NPM add new node.

Thanks but ive tried everyting there and I am still getting the same error.

This is very depressing.

I got it to work finally! Any ideas as to why this config was sucessfull i used this exact config from cisco:

The following example shows how to enable Simple Network Management Protocol Version 3 (SNMPv3). The configuration permits any SNMP manager to access all objects with read-only permissions using the community string named “public”. This configuration does not cause the device to send traps.

Device(config)# snmp-server community public

The following example shows how to configure a remote user to receive traps at the “noAuthNoPriv” security level when the SNMPv3 security model is enabled:

Device(config)# snmp-server group group1 v3 noauth Device(config)# snmp-server user remoteuser1 group1 remote 10.12.8.4 Device(config)# snmp-server host 10.12.8.4 informs version 3 noauth remoteuser config

The following example shows how to configure a remote user to receive traps at the “authNoPriv” security level when the SNMPv3 security model is enabled:

Device(config)# snmp-server group group2 v3 auth Device(config)# snmp-server user AuthUser group2 remote 10.12.8.4 v3 auth md5 password1

The following example shows how to configure a remote user to receive traps at the “priv” security level when the SNMPv3 security model is enabled:

Device(config)# snmp-server group group3 v3 priv Device(config)# snmp-server user PrivateUser group3 remote 10.12.8.4 v3 auth md5 password1 priv access des56

How come the configurations I posted initially  didient work any ideas?

Calm will analyze this information you've posted and see where I can help you.

I used this reference, when setting up my SNMP V3 on the switches and within Orion which is working Setup Cisco SNMPv3 via CLI - Documents

Thanks i got it to work with your reference. I think the view was wrong.

Thanks a lot!

You are welcome