cancel
Showing results for 
Search instead for 
Did you mean: 
Create Post

Perimeter Layer 3 Switch running Cisco IOS and XE-OS

Thank you for choosing this document.

You will need to create TWO Custom Properties for your Cisco Devices.

Name the first column "Device_Type" and include the following drop-down selections:

L2SW  -  Layer 2 Switches

IL3S     -  Infrastructure Layer 3 Switches

IRTR    -  Infrastructure Routers

PL3S   -  Perimeter Layer 3 Switches

PRTR   -  Perimeter Routers

IS4K    -  ISR 4000 Series Routers

ASA    -  ASA Firewalls

Name the second custom property "OS" and include the following drop-down selections:

OSXE  -  To support IOS and OS-XE devices

NXOS  -  To support Nexus OS

ASA    -  To support ASA OS

IS4K  -   To support ISR Series Routers

This file was uploaded from the "Shared on Thwack" Tab via NCM Compliance tree.

Thanks and stay tuned........

Cisco STIGs

Everything DISA STIGs for your Network

Labels (1)
Tags (1)
Version history
Revision #:
1 of 1
Last update:
‎05-27-2017 03:48 AM
Updated by: