This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.
You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

Error adding ISC DHCP Server to IPAM

FormerMember
FormerMember

When adding my ISC DHCP Server to IPAM in order to test this Solarwinds' Software, I receive the following error:

Test Failed. More than one script file path found.

This happens when testing the credentials for accessing the server.

Any hints as to what is happening will be appreciated.

IPAM version: 4.3

ISC DHCP version: 4.2.5

OS: Linux centos 7

  • This below link is having pre request for setting up the ISC dhcp server

    http://knowledgebase.solarwinds.com/kb/questions/5196/ISC+DHCP+Minimum+Requirements

    We need IPAM business layer log in debug mode.Go to Log adjuster then adjust debug mode for following areas

    1. IP Address Manager

    Test the Isc DHCP server once again and sent out logs which will be usually located in C:\programdata\Solarwinds\Logs\IPAM

  • FormerMember
    0 FormerMember in reply to muralikvp

    Thank you for your reply.

    I have been looking for a way to send you the output of the log file as suggested, but there is not an option to attach a file. I am very sorry for pasting the long text that follows:

    2015-06-24 09:53:06,694 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [IscDhcpVersionInfoA]...

    2015-06-24 09:53:06,701 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['dhcpd --version']...

    2015-06-24 09:53:06,704 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:06,705 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:06,706 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:06,706 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending:

    2015-06-24 09:53:06,708 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data:

    [root@localhost ~]#

    2015-06-24 09:53:06,723 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: dhcpd --version

    2015-06-24 09:53:06,724 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: dhcpd --version

    2015-06-24 09:53:06,744 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: isc-dhcpd-4.2.5

    2015-06-24 09:53:06,746 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [root@localhost ~]#

    2015-06-24 09:53:06,749 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:06,750 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd0,Command='dhcpd --version']

    isc-dhcpd-4.2.5

    2015-06-24 09:53:06,751 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:06,751 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:06,752 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='dhcpd --version',WaitTime=00:00:00.0470564]

    isc-dhcpd-4.2.5

    2015-06-24 09:53:06,758 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseBindVersionInfoA, rule=ParseBindVersionInfoA]...

    2015-06-24 09:53:06,777 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseBindVersionInfoA] succeeded.

    2015-06-24 09:53:06,786 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [IscDhcpVersionInfoA] executed

    2015-06-24 09:53:06,793 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:06,793 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: IscDhcpVersionInfoA

    Command Text: dhcpd --version

    DefaultNextCommand Name: IscDhcpVersionInfoB

    Actions:

    Action Name: ParseBindVersionInfoA

    Next command name: Set:[ErrorCode]=0

    Rule:

      Rule Name: ParseBindVersionInfoA

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: [a-zA-Z-]+(?<IscDhcpVersionA>[\d.]+).*

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    isc-dhcpd-4.2.5

    -- raw value end ------------------------------------------

    2015-06-24 09:53:06,793 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

    2015-06-24 09:53:06,796 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

    2015-06-24 09:53:06,798 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:06,798 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: Set:[ErrorCode]=0

    DefaultNextCommand Name: FindEnviornmentPath

    Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

    2015-06-24 09:53:06,799 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindEnviornmentPath]...

    2015-06-24 09:53:06,799 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['echo $PATH_DHCPD_DB']...

    2015-06-24 09:53:06,800 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:06,800 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:06,801 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:06,801 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:06,802 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: echo $PATH_DHCPD_DB

    2015-06-24 09:53:06,804 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: echo $PATH_DHCPD_DB

    [root@localhost ~]#

    2015-06-24 09:53:06,804 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:06,805 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd1,Command='echo $PATH_DHCPD_DB']

    2015-06-24 09:53:06,805 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:06,806 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:06,806 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='echo $PATH_DHCPD_DB',WaitTime=00:00:00.0060380]

    2015-06-24 09:53:06,807 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseEnvironmentPath, rule=FindEnvironmentPath]...

    2015-06-24 09:53:06,810 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [FindEnvironmentPath] succeeded.

    2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindEnviornmentPath] executed

    2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: FindEnviornmentPath

    Command Text: echo $PATH_DHCPD_DB

    DefaultNextCommand Name: Set:[ErrorCode]=5000

    Actions:

    Action Name: ParseEnvironmentPath

    Next command name: Set:[ErrorCode]=0

    Rule:

      Rule Name: FindEnvironmentPath

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: ^\s*(?<Path>\w+)?\s*

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

    2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

    2015-06-24 09:53:06,813 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:06,813 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: Set:[ErrorCode]=0

    DefaultNextCommand Name: FindDistributionInfo

    Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

    2015-06-24 09:53:06,814 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindDistributionInfo]...

    2015-06-24 09:53:06,814 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['uname -mrs']...

    2015-06-24 09:53:06,815 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:06,815 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:06,816 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:06,816 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:06,817 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: uname -mrs

    2015-06-24 09:53:06,819 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: uname -mrs

    2015-06-24 09:53:06,820 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: Linux 3.10.0-123.el7.x86_64 x86_64

    2015-06-24 09:53:07,037 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [root@localhost ~]#

    2015-06-24 09:53:07,038 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,038 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd2,Command='uname -mrs']

    Linux 3.10.0-123.el7.x86_64 x86_64

    2015-06-24 09:53:07,039 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,039 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,040 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='uname -mrs',WaitTime=00:00:00.2244744]

    Linux 3.10.0-123.el7.x86_64 x86_64

    2015-06-24 09:53:07,040 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseDistributionName, rule=FindDistributionNameA]...

    2015-06-24 09:53:07,041 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [FindDistributionNameA] succeeded.

    2015-06-24 09:53:07,042 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindDistributionInfo] executed

    2015-06-24 09:53:07,042 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,043 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: FindDistributionInfo

    Command Text: uname -mrs

    DefaultNextCommand Name: Set:[ErrorCode]=1001

    Actions:

    Action Name: ParseDistributionName

    Next command name: Set:[ErrorCode]=0

    Rule:

      Rule Name: FindDistributionNameA

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: ^(?<FullDistirbutionInfo>[\w\s.-]+)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    Linux 3.10.0-123.el7.x86_64 x86_64

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,043 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

    2015-06-24 09:53:07,044 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

    2015-06-24 09:53:07,044 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,044 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: Set:[ErrorCode]=0

    DefaultNextCommand Name: DhcpdProcessInfo

    Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

    2015-06-24 09:53:07,045 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [DhcpdProcessInfo]...

    2015-06-24 09:53:07,045 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['ps -w -A -o comm,pid,args | grep ^dhcpd -w']...

    2015-06-24 09:53:07,046 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,046 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,047 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,059 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,059 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: ps -w -A -o comm,pid,args | grep ^dhcpd -w

    2015-06-24 09:53:07,061 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: ps -w -A -o comm,pid,args | grep ^dhcpd -w

    2015-06-24 09:53:07,074 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

    2015-06-24 09:53:07,075 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [root@localhost ~]#

    2015-06-24 09:53:07,076 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,077 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd3,Command='ps -w -A -o comm,pid,args | grep ^dhcpd -w']

    dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

    2015-06-24 09:53:07,077 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,078 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,078 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='ps -w -A -o comm,pid,args | grep ^dhcpd -w',WaitTime=00:00:00.0319861]

    dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

    2015-06-24 09:53:07,079 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseIscDhcpProcessInfo, rule=ParseProcessInfo]...

    2015-06-24 09:53:07,080 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseProcessInfo] succeeded.

    2015-06-24 09:53:07,081 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [DhcpdProcessInfo] executed

    2015-06-24 09:53:07,081 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,082 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: DhcpdProcessInfo

    Command Text: ps -w -A -o comm,pid,args | grep ^dhcpd -w

    DefaultNextCommand Name: DhcpdProcessInfo

    Actions:

    Action Name: ParseIscDhcpProcessInfo

    Next command name: ComputeConfigFilePath

    Rule:

      Rule Name: ParseProcessInfo

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: ^dhcp.?\s+(?<FullCommandOutput>.+)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

    -- raw value end ------------------------------------------

      Child Rules:

       Rule Name: ParseProcessPid

       Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

        RegexPattern: ^dhcp.?\s+(?<ProcessPid>\d+)\s+.*

        Matches [count=1]:

         RawValue:

    -- raw value begin -------------------------------------

    dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

    -- raw value end ------------------------------------------

       Rule Name: ParseProcessCmd

       Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

        RegexPattern: ^dhcp.?\s+\d+\s+(?<ProcessCmd>.+)

        Matches [count=1]:

         RawValue:

    -- raw value begin -------------------------------------

    dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

    -- raw value end ------------------------------------------

       Rule Name: ParseCustomConfigPath

       Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

        RegexPattern: ^dhcp.*-cf\s+(?<CustomConfigPath>[/\w\.-_]+)

        Matches [count=1]:

         RawValue:

    -- raw value begin -------------------------------------

    dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf

    -- raw value end ------------------------------------------

       Rule Name: ParseChrootPath

       Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

        RegexPattern: ^dhcp.*-chroot\s+(?<ChrootPath>[/\w]+)

        Matches [count=0]:

       Rule Name: ParseLeaseFilePath

       Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

        RegexPattern: ^dhcp.*-lf\s+(?<LeaseFilePath>[/\w\.-_]+)

        Matches [count=0]:

    2015-06-24 09:53:07,082 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeConfigFilePath]...

    2015-06-24 09:53:07,085 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeConfigFilePath] executed

    2015-06-24 09:53:07,085 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,086 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: ComputeConfigFilePath

    DefaultNextCommand Name: Set:[ErrorCode]=0

    Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.IscDhcpProcessInfoCommandBuilder+ConfigPathCalculation

    2015-06-24 09:53:07,086 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

    2015-06-24 09:53:07,086 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

    2015-06-24 09:53:07,087 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,087 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: Set:[ErrorCode]=0

    DefaultNextCommand Name: SeekFileExist :/etc/dhcpd.conf

    Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

    2015-06-24 09:53:07,088 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/dhcpd.conf]...

    2015-06-24 09:53:07,088 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/dhcpd.conf" ] && echo 'true'']...

    2015-06-24 09:53:07,089 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,089 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,090 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,090 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,091 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/dhcpd.conf" ] && echo 'true'

    2015-06-24 09:53:07,093 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/dhcpd.conf" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,094 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,095 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd4,Command='[ -f "/etc/dhcpd.conf" ] && echo 'true'']

    2015-06-24 09:53:07,095 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,096 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,096 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/dhcpd.conf" ] && echo 'true'',WaitTime=00:00:00.0070117]

    2015-06-24 09:53:07,097 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,098 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,099 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/dhcpd.conf] executed

    2015-06-24 09:53:07,099 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,100 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/etc/dhcpd.conf

    Command Text: [ -f "/etc/dhcpd.conf" ] && echo 'true'

    DefaultNextCommand Name: Set:[ErrorCode]=2002

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/etc/inet/dhcpd4.conf

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,100 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/inet/dhcpd4.conf]...

    2015-06-24 09:53:07,101 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'']...

    2015-06-24 09:53:07,101 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,102 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,102 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,103 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,103 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'

    2015-06-24 09:53:07,105 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,106 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,107 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd5,Command='[ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'']

    2015-06-24 09:53:07,107 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,107 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,108 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'',WaitTime=00:00:00.0060503]

    2015-06-24 09:53:07,108 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,109 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,110 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/inet/dhcpd4.conf] executed

    2015-06-24 09:53:07,110 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,111 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/etc/inet/dhcpd4.conf

    Command Text: [ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/etc/dhcp/dhcpd.conf

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,111 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/dhcp/dhcpd.conf]...

    2015-06-24 09:53:07,111 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'']...

    2015-06-24 09:53:07,112 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,112 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,113 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,113 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,114 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'

    2015-06-24 09:53:07,116 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'

    true

    [root@localhost ~]#

    2015-06-24 09:53:07,117 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,117 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd6,Command='[ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'']

    true

    2015-06-24 09:53:07,118 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,118 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,119 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'',WaitTime=00:00:00.0060933]

    true

    2015-06-24 09:53:07,119 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,119 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,120 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/dhcp/dhcpd.conf] executed

    2015-06-24 09:53:07,120 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,121 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/etc/dhcp/dhcpd.conf

    Command Text: [ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/usr/local/etc/dhcpd.conf

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=2]:

        RawValue:

    -- raw value begin -------------------------------------

    true

    -- raw value end ------------------------------------------

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,121 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/usr/local/etc/dhcpd.conf]...

    2015-06-24 09:53:07,122 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'']...

    2015-06-24 09:53:07,122 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,123 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,123 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,124 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,124 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'

    2015-06-24 09:53:07,126 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,127 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,127 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd7,Command='[ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'']

    2015-06-24 09:53:07,128 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,128 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,129 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'',WaitTime=00:00:00.0060827]

    2015-06-24 09:53:07,129 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,130 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,130 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/usr/local/etc/dhcpd.conf] executed

    2015-06-24 09:53:07,131 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,131 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/usr/local/etc/dhcpd.conf

    Command Text: [ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: FindDuplicateConfigFile

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,131 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindDuplicateConfigFile]...

    2015-06-24 09:53:07,134 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindDuplicateConfigFile] executed

    2015-06-24 09:53:07,134 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,135 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: FindDuplicateConfigFile

    DefaultNextCommand Name: ComputeConfigFilePath

    Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekConfigFileLocationCommadBuilder+FindDuplicateConfigFile

    2015-06-24 09:53:07,135 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeConfigFilePath]...

    2015-06-24 09:53:07,137 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeConfigFilePath] executed

    2015-06-24 09:53:07,138 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,138 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: ComputeConfigFilePath

    DefaultNextCommand Name: Set:[ErrorCode]=0

    Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekConfigFileLocationCommadBuilder+LocateConfigFile

    2015-06-24 09:53:07,139 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

    2015-06-24 09:53:07,139 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

    2015-06-24 09:53:07,140 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,140 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: Set:[ErrorCode]=0

    DefaultNextCommand Name: SeekFileExist :/var/db/dhcpd.leases

    Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

    2015-06-24 09:53:07,140 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/db/dhcpd.leases]...

    2015-06-24 09:53:07,141 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/db/dhcpd.leases" ] && echo 'true'']...

    2015-06-24 09:53:07,141 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,142 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,142 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,143 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,143 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/db/dhcpd.leases" ] && echo 'true'

    2015-06-24 09:53:07,145 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/db/dhcpd.leases" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,146 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,147 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd8,Command='[ -f "/var/db/dhcpd.leases" ] && echo 'true'']

    2015-06-24 09:53:07,147 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,148 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,148 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/db/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0063803]

    2015-06-24 09:53:07,149 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,149 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,150 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/db/dhcpd.leases] executed

    2015-06-24 09:53:07,150 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,151 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/var/db/dhcpd.leases

    Command Text: [ -f "/var/db/dhcpd.leases" ] && echo 'true'

    DefaultNextCommand Name: Set:[ErrorCode]=2004

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/var/lib/dhcpd/dhcpd.leases

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,151 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/lib/dhcpd/dhcpd.leases]...

    2015-06-24 09:53:07,151 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'']...

    2015-06-24 09:53:07,152 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,152 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,153 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,153 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,154 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'

    2015-06-24 09:53:07,156 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'

    true

    [root@localhost ~]#

    2015-06-24 09:53:07,157 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,158 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd9,Command='[ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'']

    true

    2015-06-24 09:53:07,158 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,159 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,159 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0066383]

    true

    2015-06-24 09:53:07,160 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,160 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,161 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/lib/dhcpd/dhcpd.leases] executed

    2015-06-24 09:53:07,161 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,161 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/var/lib/dhcpd/dhcpd.leases

    Command Text: [ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/var/lib/dhcp/dhcpd.leases

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=2]:

        RawValue:

    -- raw value begin -------------------------------------

    true

    -- raw value end ------------------------------------------

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,162 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/lib/dhcp/dhcpd.leases]...

    2015-06-24 09:53:07,162 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'']...

    2015-06-24 09:53:07,163 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,163 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,164 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,164 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,165 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'

    2015-06-24 09:53:07,166 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,167 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,168 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd10,Command='[ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'']

    2015-06-24 09:53:07,169 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,169 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,170 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0065928]

    2015-06-24 09:53:07,170 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,171 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,171 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/lib/dhcp/dhcpd.leases] executed

    2015-06-24 09:53:07,172 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,172 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/var/lib/dhcp/dhcpd.leases

    Command Text: [ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/var/db/dhcpd/dhcpd.leases

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,172 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/db/dhcpd/dhcpd.leases]...

    2015-06-24 09:53:07,173 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'']...

    2015-06-24 09:53:07,173 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,174 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,174 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,175 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,175 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'

    2015-06-24 09:53:07,177 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,178 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,179 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd11,Command='[ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'']

    2015-06-24 09:53:07,180 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,180 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,181 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0071462]

    2015-06-24 09:53:07,181 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,182 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,182 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/db/dhcpd/dhcpd.leases] executed

    2015-06-24 09:53:07,183 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,183 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/var/db/dhcpd/dhcpd.leases

    Command Text: [ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: FindDuplicateLeaseFile

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,184 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindDuplicateLeaseFile]...

    2015-06-24 09:53:07,202 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindDuplicateLeaseFile] executed

    2015-06-24 09:53:07,202 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,203 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: FindDuplicateLeaseFile

    DefaultNextCommand Name: ComputeConfigFilePath

    Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekLeaseFileLocationCommadBuilder+FindDuplicateLeaseFile

    2015-06-24 09:53:07,203 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeConfigFilePath]...

    2015-06-24 09:53:07,206 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeConfigFilePath] executed

    2015-06-24 09:53:07,206 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,207 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: ComputeConfigFilePath

    DefaultNextCommand Name: Set:[ErrorCode]=0

    Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekLeaseFileLocationCommadBuilder+LocateLeaseFile

    2015-06-24 09:53:07,207 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

    2015-06-24 09:53:07,207 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

    2015-06-24 09:53:07,208 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,208 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: Set:[ErrorCode]=0

    DefaultNextCommand Name: SeekFileExist :/etc/init.d/dhcpd

    Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

    2015-06-24 09:53:07,209 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/init.d/dhcpd]...

    2015-06-24 09:53:07,209 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/init.d/dhcpd" ] && echo 'true'']...

    2015-06-24 09:53:07,210 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,210 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,211 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,211 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,212 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/init.d/dhcpd" ] && echo 'true'

    2015-06-24 09:53:07,213 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/init.d/dhcpd" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,214 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,215 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd12,Command='[ -f "/etc/init.d/dhcpd" ] && echo 'true'']

    2015-06-24 09:53:07,215 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,215 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,216 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/init.d/dhcpd" ] && echo 'true'',WaitTime=00:00:00.0058007]

    2015-06-24 09:53:07,216 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,219 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,220 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/init.d/dhcpd] executed

    2015-06-24 09:53:07,220 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,221 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/etc/init.d/dhcpd

    Command Text: [ -f "/etc/init.d/dhcpd" ] && echo 'true'

    DefaultNextCommand Name: Set:[ErrorCode]=2015

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/etc/init.d/dhcp

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,221 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/init.d/dhcp]...

    2015-06-24 09:53:07,222 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/init.d/dhcp" ] && echo 'true'']...

    2015-06-24 09:53:07,222 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,223 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,223 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,224 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,224 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/init.d/dhcp" ] && echo 'true'

    2015-06-24 09:53:07,226 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/init.d/dhcp" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,227 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,227 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd13,Command='[ -f "/etc/init.d/dhcp" ] && echo 'true'']

    2015-06-24 09:53:07,227 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,228 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,228 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/init.d/dhcp" ] && echo 'true'',WaitTime=00:00:00.0057003]

    2015-06-24 09:53:07,229 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,229 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,230 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/init.d/dhcp] executed

    2015-06-24 09:53:07,230 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,231 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/etc/init.d/dhcp

    Command Text: [ -f "/etc/init.d/dhcp" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/etc/rc.d/dhcpd

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,231 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/rc.d/dhcpd]...

    2015-06-24 09:53:07,232 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/rc.d/dhcpd" ] && echo 'true'']...

    2015-06-24 09:53:07,232 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,232 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,233 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,233 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,234 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/rc.d/dhcpd" ] && echo 'true'

    2015-06-24 09:53:07,237 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/rc.d/dhcpd" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,238 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,239 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd14,Command='[ -f "/etc/rc.d/dhcpd" ] && echo 'true'']

    2015-06-24 09:53:07,239 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,239 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,240 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/rc.d/dhcpd" ] && echo 'true'',WaitTime=00:00:00.0074167]

    2015-06-24 09:53:07,240 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,241 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,241 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/rc.d/dhcpd] executed

    2015-06-24 09:53:07,242 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,242 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/etc/rc.d/dhcpd

    Command Text: [ -f "/etc/rc.d/dhcpd" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,242 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd]...

    2015-06-24 09:53:07,243 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'']...

    2015-06-24 09:53:07,244 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,244 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,245 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,246 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,246 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'

    2015-06-24 09:53:07,248 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,249 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,249 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd15,Command='[ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'']

    2015-06-24 09:53:07,250 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,250 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,250 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'',WaitTime=00:00:00.0064600]

    2015-06-24 09:53:07,251 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,251 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,252 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd] executed

    2015-06-24 09:53:07,252 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,253 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd

    Command Text: [ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: SeekFileExist :/etc/init.d/isc-dhcp-server

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,253 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/init.d/isc-dhcp-server]...

    2015-06-24 09:53:07,253 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'']...

    2015-06-24 09:53:07,254 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

    2015-06-24 09:53:07,255 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

    2015-06-24 09:53:07,255 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

    2015-06-24 09:53:07,255 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,256 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'

    2015-06-24 09:53:07,258 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'

    [root@localhost ~]#

    2015-06-24 09:53:07,259 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

    2015-06-24 09:53:07,259 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd16,Command='[ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'']

    2015-06-24 09:53:07,259 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

    2015-06-24 09:53:07,260 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:07,260 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'',WaitTime=00:00:00.0057358]

    2015-06-24 09:53:07,261 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

    2015-06-24 09:53:07,261 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

    2015-06-24 09:53:07,262 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/init.d/isc-dhcp-server] executed

    2015-06-24 09:53:07,262 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,262 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: SeekFileExist :/etc/init.d/isc-dhcp-server

    Command Text: [ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'

    DefaultNextCommand Name: null

    Actions:

    Action Name: ParseCheckFileExistOutput

    Next command name: ComputeScriptFilePath

    Rule:

      Rule Name: ParseCheckFileExistOutput

      Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

       RegexPattern: (?<CheckFileExist>^true|^\s*)

       Matches [count=1]:

        RawValue:

    -- raw value begin -------------------------------------

    -- raw value end ------------------------------------------

    2015-06-24 09:53:07,263 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeScriptFilePath]...

    2015-06-24 09:53:07,266 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeScriptFilePath] executed

    2015-06-24 09:53:07,267 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,267 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: ComputeScriptFilePath

    DefaultNextCommand Name: Set:[ErrorCode]=0

    Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekScriptFileLocationCommadBuilder+LocateScriptFile

    2015-06-24 09:53:07,268 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=2014]...

    2015-06-24 09:53:07,268 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=2014] executed

    2015-06-24 09:53:07,269 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:07,269 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: Set:[ErrorCode]=2014

    DefaultNextCommand Name: null

    Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

    2015-06-24 09:53:07,274 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Disconnecting. [Host=192.168.19.236]...

    2015-06-24 09:53:07,274 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Disconnected. [Host=192.168.19.236]

    2015-06-24 09:53:07,275 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Disconnect signal sent.

    2015-06-24 09:53:07,276 [STP SmartThreadPool Thread #0] INFO  SwTelnet9CommandProcessor - [1] Processing stats: Host=192.168.19.236,Response(Num=17,Min=00:00:00.0057003,Avg=00:00:00.0230978,Max=00:00:00.2244744),Command(Num=17,Min=00:00:00.0049740,Avg=00:00:00.0118117,Max=00:00:00.0496234)

    2015-06-24 09:53:07,278 [10] DEBUG SwTelnet9CommandProcessor - [1] Processor disconnected.

    2015-06-24 09:53:07,279 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

    2015-06-24 09:53:07,289 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Processor created.

    2015-06-24 09:53:07,290 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Preparing to connect... [Host=192.168.19.236]

    2015-06-24 09:53:07,291 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Connecting... [Host=192.168.19.236]

    2015-06-24 09:53:07,455 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

    2015-06-24 09:53:07,456 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

    2015-06-24 09:53:07,685 [10] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data: Last login: Wed Jun 24 09:49:30 2015 from dodo.uis.edu.co

    2015-06-24 09:53:07,701 [10] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data: [root@localhost ~]#

    2015-06-24 09:53:08,455 [14] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

    2015-06-24 09:53:08,456 [14] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

    2015-06-24 09:53:08,691 [15] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet session disconnected.

    2015-06-24 09:53:09,455 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

    2015-06-24 09:53:09,456 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

    2015-06-24 09:53:10,303 [15] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Sending:

    2015-06-24 09:53:10,305 [14] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data:

    [root@localhost ~]#

    2015-06-24 09:53:10,455 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

    2015-06-24 09:53:10,456 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

    2015-06-24 09:53:11,455 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

    2015-06-24 09:53:11,456 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

    2015-06-24 09:53:12,316 [16] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Sending:

    2015-06-24 09:53:12,318 [14] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data:

    [root@localhost ~]#

    2015-06-24 09:53:12,319 [14] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Login succeeded.

    2015-06-24 09:53:12,319 [14] DEBUG SwTelnet9CommandProcessor - [2] Waiting for next ProcessCommand execution...

    2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Connected. [Host=192.168.19.236]

    2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [CheckErrorCode]...

    2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [CheckErrorCode] executed

    2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

    2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

    Command Name: CheckErrorCode

    DefaultNextCommand Name: Assign:DownloadFileWithIncludesPath=[ConfigFilePath]

    Calculation: Solarwinds.IPAM.Jobs.ISCCommon.Commands.CheckErrorCodeCommandBuilder+CheckErrorCodeCalculation

    2015-06-24 09:53:12,327 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Disconnecting. [Host=192.168.19.236]...

    2015-06-24 09:53:12,327 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Disconnected. [Host=192.168.19.236]

    2015-06-24 09:53:12,327 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Disconnect signal sent.

    2015-06-24 09:53:12,329 [STP SmartThreadPool Thread #0] INFO  SwTelnet9CommandProcessor - [2] Processing stats: Host=192.168.19.236,Response(Num=0,Min=00:00:00,Avg=00:00:00,Max=00:00:00),Command(Num=0,Min=00:00:00,Avg=00:00:00,Max=00:00:00)

    2015-06-24 09:53:12,329 [14] DEBUG SwTelnet9CommandProcessor - [2] Processor disconnected.

    2015-06-24 09:53:12,329 [STP SmartThreadPool Thread #0] INFO  SolarWinds.Orion.IpSla.Jobs.Cli.CliExecutor - Finished. [Host=192.168.19.236,Duration=00:00:10.9166413]

    2015-06-24 09:53:12,344 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.IPAM.Jobs.DhcpCliCredentialTestJob - } DoDhcpTest exited

    2015-06-24 09:53:12,378 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.IPAM.Jobs.DhcpCliCredentialTestJob - } Execute exited

    2015-06-24 09:53:12,379 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.IPAM.Jobs.DhcpCliCredentialTestJob - } DhcpCliCredentialTest.Execute exited

    2015-06-24 09:53:12,394 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.JobEngine.WorkerProcess.JobMonitor - Stop tracking job 0cb29aa1-31b5-4d5b-86c5-a725d08f62b9

    2015-06-24 09:53:12,400 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.JobEngine.WorkerProcess.AgentDispatcher - } ExecuteJob exited

    2015-06-24 09:53:12,459 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

    2015-06-24 09:53:12,464 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

    2015-06-24 09:53:12,484 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { CleanupJobResults entered

    2015-06-24 09:53:12,490 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } CleanupJobResults exited

    2015-06-24 09:53:14,318 [17] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet session disconnected.

    Thanks for understanding.

    Looking forward to hearing from you.

  • FormerMember
    0 FormerMember

    Any progress with this issue?  I am also getting the same error.

  • Did you ever get it figured out?  I am also having this same issue.  IPAM 4.3.2, CentOS 7.2, DHCP 4.2.5

    I think it is due to the service startup changes in CentOS 7.  You can find more info here:  8.2. Managing System Services

    From what I can see CentOS 7 doesn't really use startup scripts anymore.  It uses the systemd program to manage all of that and has individual files telling it the details for each service.  The scripts are no longer in the /etc/init.d directory and so IPAM fails to add the server when it cannot find them.  

    I have a ticket open with support but do not have an official answer at this time.

  • is the problem solved ? I am also facing the same problem.

  • I also have this issue... Any forward progress at all?  Is anyone listening?  I hear echos...

  • Did your ticket ever get resolved?  Because I am chasing down the exact same issue with them, and have a ticket open as well.  If you have a ticket number I'd love to reference that to them so that they can get on with the fix for this.  Most of the Linux distros are now using SystemD, so this is a very widespread issue...

  • Hello,

    I'm having the same issue. Did you finally solve it?

    Regards,

  • IPAM 4.6 has many compatibility RHEL7 and CentOS7 issues fixed. You can try IPAM 4.6 RC3, which is available on customer portal

  • Where are you finding 4.6? It's not in my customer portal and the product site shows 4.5.2 as the latest version available:

    IP Address Manager (IPAM) Documentation - SolarWinds Worldwide, LLC. Help and Support

    I'm also having this issue with a CentOS DHCP server. I ran the hotfix for 4.5.1 hoping it'd address the issue on 4.5.2 as well, but no joy.