cancel
Showing results for 
Search instead for 
Did you mean: 

Network Topology Mapper - The Latest Network Mapping & Discovery Tool from SolarWinds

Level 11

SolarWinds is pleased to announce the release of its latest network discovery and mapping tool, Network Topology Mapper (NTM).  NTM has a broad set of applications and use cases ranging from simple discovery of network devices to the maintenance of network diagrams to meet specific information security requirements.

Network Discovery

NTM is a robust network discovery tool that can be used on an unlimited number of networks.  This makes NTM the perfect tool for Managed Service Providers and IT Consultants that work with multiple clients.  Simply install NTM on a laptop, take it to clients’ locations, and use it to scan and map their networks.  You’ll quickly find all of the devices on a network and have them presented in an easy-to-use interface.

NTM’s network discovery feature gathers information about network nodes utilizing multiple polling methods.  These include ICMP, SNMP v1-v3, WMI, CDP, LLDP, and VMware.  Using these methods, NTM can create a comprehensive network map that shows you all of the devices on a network – even those that aren't supposed to be there.

Network Mapping

NTM uses the information it gathers from network scans to create highly accurate network maps.  Network maps created with NTM can be displayed in several ways to give you the most appropriate visible representation of your network topology depending on your needs.  Maps created with NTM contain a wealth of information about your network and the nodes on it including network speed between nodes, hardware type, subnets and VLANs.  NTM also contains a set of role classification filters that allow you to display devices based on their role or only show specific network segments.

Exporting network maps created with NTM is a snap!  NTM allows you to export your network maps to Microsoft® Visio® versions 2007-2013, PNG, and PDF formats.  It also allows you to export to SolarWinds Network Atlas format.  Maps exported to Network Atlas format can easily be imported into Orion and used by other SolarWinds products like Network Performance Monitor.

NTM_1-0_NETWORK_MAPPING_REGULATORY_COMPLIANCE_Base_EN.png

Meeting Specific Requirements of Information Security Standards

More and more, organizations are required to adhere to rules laid out by information security standards like PCI, HIPAA, SOX, and others.  Many of these information security standards require organizations to keep up-to-date diagrams of their networks.  NTM can help organizations meet these requirements with its scanning and mapping features.  NTM includes a scheduled scan feature that can be set to run scans of a network at intervals chosen by the organization.  Each new scan represents a picture of a network as it exists at that time.  These can be exported and archived to ensure an organization is meeting these network mapping requirements.

Additionally, new diagrams created at each scan show changes to network topology since the last scan.  In this way, NTM can be used to detect rogue devices or unauthorized changes to a network.

Check Out SolarWinds NTM

Like all other SolarWinds products, NTM is available for a free trial.  If you are an IT Consultant, work for an MSP, have to meet information security requirements, or just need to see what’s on your ever-growing network, NTM can help.

5 Comments
Horch
Level 9

If it's as slow as the built-in discovery in NPM, you might have to pay ME to use it.

-Dave Horch

glenn_gray
Level 11

Hi Dave

The speed of the discovery process will depend largely on the number of discovery methods in NTM you choose to utilize and the size of the network.  On a fairly small network (100 or so nodes) using SNMP, ICMP, and WMI, I got results back in about 5 minutes.  You should be able to impact the speed by using the seed device option too.  Hard to say how it would compare to an NPM discovery of the same network, though.  We'd love some feedback on it if you'd consider comparing the two on your network.

Thanks

Glenn  

jkump
Level 15

Looks like an interesting tool.

aa2000
Level 7

Hi

I came across your post on NTM and wanted to ask some questions. We are using a monitoring tool. It contains network autodiscovery and topology mapping. It performs discovery via SNMP. But the problem is that it does not detect neighbor devices correctly and hence does not plot the topology map correctly.

I read that NTM also performs discovery via SNMP and maps network topology. So I wanted to know that how is it able to correctly plot the topology map? Does it apply on Layer-2 (switches) and Layer-3 (routers) both? Does it require CDP or LLDP to be enabled on the switches to discovery neighbor devices? What if CDP/LLDP is not enabled on the switches?

Thanks

alexpf
Level 11

Is NTM still being updated? It seems like there has not been an update in 18 months.

Thanks,

Alex