Cisco Cellular Monitoring - RSRP/RSRQ/SINR/SNR - I've added multiple UnDP's for Cellular monitoring and my router's 5G/4GLTE Cellular output but only my RSRP outpu matches b/t my router and Solarwind UnDP... RSRQ/SINR/SNR provide outputs that d

I would start with an SNMP walk to see what values are getting pulled in. I have a weird feeling that you may need to transform the numbers or fiddle with the chart. -9 and -90 could be the same value, depending how it is presented/transformed. Example: I am thinking of converting bytes, kilobytes, megabyte values that need something done before you can make sense of them - 1024 bytes looks big until you convert it to 1 kb. 

I would start with an SNMP walk to see what values are getting pulled in. I have a weird feeling that you may need to transform the numbers or fiddle with the chart. -9 and -90 could be the same value, depending how it is presented/transformed. Example: I am thinking of converting bytes, kilobytes, megabyte values that need something done before you can make sense of them - 1024 bytes looks big until you convert it to 1 kb. 

hey Marco - Thanks for the response! 

I have an open ticket with both Solarwinds and Cisco on this matter... With the Soalrwinds ticket, we did an snmpwalk and came up with the OID's you see above... 
They did mention some timeout's they were seeing in the diagnostic I provided them and to work with Cisco on a potential configuration that may need to be either implemented or a change in the CLI... 
I am playing around with the formatting based on Solarwinds documentation but mostly in the background... multitasking as usual... 
I'm sure we'll get to the bottom of this but I was posting this here in hope someone has run across this issue in the past and can shed some light on it... 
Cisco - > Solarwinds - > Cellular Monitoring - > Seems like someone has done this in the past at some point... ;)