Display universal device poller

CURRENTLY SEE.docx

See attachment for I currently see and what I would like to be able to see.

I've marked this for the product manager's review, as I believe we are currently unable provide the level of detail you have requested. 

What OIDs are you polling with your defined UnDP's?

Currently polling these OID's:

1.3.6.1.4.1.9.9.161.1.4.2.1.4

1.3.6.1.4.1.9.9.161.1.4.2.1.5

1.3.6.1.4.1.9.9.161.1.4.2.1.6

1.3.6.1.4.1.9.9.161.1.4.2.1.7

But over time will also like to monitor the below OID's. When I try to add them to the same poller I get the message 'The OID is not supported':

1.3.6.1.4.1.9.9.161.1.3.1.1.4

1.3.6.1.4.1.9.9.161.1.3.1.1.5

1.3.6.1.4.1.9.9.161.1.3.1.1.13

1.3.6.1.4.1.9.9.161.1.3.1.1.15

Ultimately what would be great is to have one table with multiple columns/row for each OID being polled/monitored.

You should be able to get a lot of this.  On the current state it returns a number, but you can map these number to text values to be displayed.  Also you can select which columns to show in the table.

You should be able to get a lot of this.  On the current state it returns a number, but you can map these number to text values to be displayed.  Also you can select which columns to show in the table.

Is there any documentation you can point me to which explains how I might be able to do this?

karim1,

You should find what you need in the chapter "Monitoring MIBs with Universal Device Pollers" of the SolarWinds Orion NPM Administrator Guide, specifically, step 11 of the procedure in section "Creating Universal Device Pollers" may prove useful.

HTH,