Thwack please check and fix this bug
-
Device Template for Cisco 2507 Router
Cisco IOS2507-1.3.6.1.4.1.9.1.23.ConfigMgmt-CommandsThe Cisco 2507 is an old router and this template is modified for the Indirect Download using TFTP. I haven't modified any other parts of this template.
-
Dell PowerConnect M8024 Switch
Dell PowerConnect Switch-1.3.6.1.4.1.674.10895.3022.ConfigMgmt-CommandsThis is based on the Dell PowerConnect Switch-1.3.6.1.4.1.674.10895.3 template but has the correct config for the Indirect Download for this device. Allows you to use TFTP instead of Telnet as the transfer method.
-
Juniper WXC Device Template
Juniper-WXC-1.3.6.1.4.1.8239.1.2.ConfigMgmt-CommandsI got a template working that will download the configs from Juniper WXC (peribit) WAN accelerators Caveat is that I have not yet tested (or plan to) the "erase" or "save" config options - though I'm sure the save one should work - you should test first anything other…
-
3Com SuperStack 3 Switch Family Device Template
3COM_SuperStack3_Family-1.3.6.1.4.1.43.10.27.4.1.2.10.ConfigMgmt-CommandsThis device template has been tested against the following 3Com devices: 4050 4924 4400 The templates only functionality is download/upload of device configs via TFTP.
-
D-Link DES-3528 Device template ( Downloading configs via TELNET and TFTP)
Dlink DES-3528-1.3.6.1.4.1.171.10.105.1.ConfigMgmt-CommandsConfiguration management file for D-Link DES-3528 Switch. This sript allows you to save configuration from your DES-3528 (1.3.6.1.4.1.171.10.105.1): 1. Current config via TFTP. 2. Current config via TELNET (With storing in NCM database). 2. NVRAM config via TELNET…
-
Lantronix Console Server
Lantronix Console Server-1.3.6.1.4.1.244.ConfigMgmt-CommandsTested successfully on Lantronix SLC48's. Since the template uses a 'show' command, using this on other Lantronix devices is probably safe, but verify your device command set if you are unsure. Notes: This NCM template will turn off CLI paging for the current…
-
Juniper EX3200-4200 Switch (download and upload working)
Juniper-EX3200-4200 Switches-1.3.6.1.4.1.2636.1.1.1.2.31.ConfigMgmt-CommandsThanks to tgrenda34 and his version here I used that and some help from Rachel at Solarwinds to create this device template for Juniper EX3200 and EX4200 switches. It's modified in that: download startup saves config in "| display set" format which…
-
Cisco 5508 Wireless Lan Controller
Cisco WLC-1.3.6.1.4.1.9.1.1069.ConfigMgmt-CommandsThis is a bare bones template to enable tftp configuration downloads to NCM. Auto determine works for a 5508 running 7.0.98.0. The template also worked with 6.0.196.0 code but I not sure if the OID for auto-determine is the same for that version.
-
Dell EqualLogic SAN
EqualLogic-1.3.6.1.4.1.12740.12.1.1.0.ConfigMgmt-CommandsUPDATED 13 JAN 2012: Modified to remove the paging prompts - thanks kristina! This is a very simple script that will download a Dell EqualLogic SAN configuration only; other options may be added in the future, however this template is designed to only download at…
-
SofaWare Safe@Office & Checkpoint UTM-Edge Device Template
Sofaware%20Technologies-1.3.6.1.4.1.6983.1.10.22.ConfigMgmt-CommandsThis NCM device template is for SofaWare Safe@Office and Check Point UTM Edge appliances and has been verified working with Firmware v8.2.12.