This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.
You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

Cisco VPN 3000 Series Concentrator

*****UPDATE*****


This might not work with 3002 series VPN concentrators.  This series of concentrator does not support TFTP as a file transfer method.


********************* 


 


This will allow Cirrus to pull down the config file from a Cisco VPN 3000 series Concentrator.  It will seem like it takes a little bit of time to complete, but it will eventually pull down the file, which will be viewable within Cirrus.


Requirements:


1. Place attached file in \SolarWinds\Configuration Management\DeviceTypes directory


2. Close Cirrus if open, then open Cirrus


3. Change Device Command Template from Auto Determine to Cisco VPN Concentrator


4. Verify that communication settings are set to telnet, telnet, TFTP

Cisco VPN Concentrator-1.3.6.1.4.1.3076.zip