Lantronix Console Server

Tested successfully on Lantronix SLC48's. Since the template uses a 'show' command, using this on other Lantronix devices is probably safe, but verify your device command set if you are unsure.

Notes: This NCM template will turn off CLI paging for the current session and run a 'show sysconfig' to the screen, allowing NCM to download detailed configuration information of the Lantronix Server Console. Since there is only one config on the SLC48, if you set NCM to download both a Running config and a Startup config in the same backup job, the config type command (Running or Startup) will be ignored, and the two configs downloaded will be identical. Diffs from previous downloads are still detected correctly and shown in reports.