Dell Server - Storage Hardware Health v1.2

Hi everyone,

This SAM template is a modified version of the originals found here ​(v1.0 by HolyGuacamole and michael100) and here ​(v1.1 by dimitri.mariutto@gmail.com). This was due to a recent Orion deployment with a lot of Dell Physical servers (100+) and 2 APEs where the NetCmdLets were considered expensive (3 server licences>$1000)

Instead, the PowerShell script is utilising the (free) Proxx.SNMP module found in PowerShell Gallery            | Home

Requirements:

  1. PowerShell 4 or 5 must be installed
    1. If using PS4, you will need to install the PowerShellGet and set the execution policy to RemoteSigned
  2. then just simple install the module with

    Install-Module -Name Proxx.SNMP

The above can be implemented in the Orion Poller(s) only if you are using local execution mode. For remote execution mode, you will have to repeat the requirements on each Dell server where the monitor will be assigned.

Script Arguments:

1. SNMP community string

Antonis Athanasiou

Prosperon - UK SolarWinds Partners

Installation | Consultancy | Training | Licenses

facebook_icon.jpglinkedin.pngblogger.pngtwitter-icon.jpg

Anonymous
Parents
  • Has anyone running Orion 2018.2/SAM 6.6.1 or newer run into an issue where this monitor constantly flaps between ​"up" and "unknown"? Like, the scripts work, but only about 30% of the time? I have a separate forum post​ describing the issue in more detail.

    Thanks

    Edit 2/25/19:

    We figured out what the problem was! See the forum post I linked for the solution.

Comment
  • Has anyone running Orion 2018.2/SAM 6.6.1 or newer run into an issue where this monitor constantly flaps between ​"up" and "unknown"? Like, the scripts work, but only about 30% of the time? I have a separate forum post​ describing the issue in more detail.

    Thanks

    Edit 2/25/19:

    We figured out what the problem was! See the forum post I linked for the solution.

Children
No Data