3Com SuperStack 3 Switch Family Device Template

This device template has been tested against the following 3Com devices:

4050

4924

4400

The templates only functionality is download/upload of device configs via TFTP.

Anonymous
  • With the given template, device is not getting the configuration where the steps for download config in 3com 4400 switches are backupconfig-->save --> Enter TFTP IP Address --> Filename --> Enter

    backupConfig${ENTER}save${ENTER}${10.141.59.4}${ENTER}${NCM COnfig}${ENTER}${ENTER}"

    Configuration-Management Device="3Com SuperStack3 Family" SystemOID=" 1.3.6.1.4.1.43.10.27.4.1.2.10" AutoDetectType="BySystemOid">

      <Commands>

        <Command Name="RESET" Value="" />

        <Command Name="Reboot" Value="" />

        <Command Name="RebootAt" Value="" />

        <Command Name="EnterConfigMode" Value="" />

        <Command Name="ExitConfigMode" Value="" />

        <Command Name="Startup" Value="" />

        <Command Name="Running" Value="" />

        <Command Name="DownloadConfig" Value="system${ENTER}backupConfig${ENTER}save${ENTER}${StorageAddress}${ENTER}${StorageFileName}${ENTER}${ENTER}" />

        <Command Name="UploadConfig" Value="" />

        <Command Name="DownloadConfigIndirect" Delay="1000" RegEx="successful" Value="system${ENTER}backupConfig${ENTER}save${ENTER}${StorageAddress}${ENTER}${StorageFileName}${ENTER}${ENTER}" />

        <Command Name="UploadConfigIndirect" Delay="1000" RegEx="successful" Value="system${ENTER}backupConfig${ENTER}restore${ENTER}${StorageAddress}${ENTER}${StorageFileName}${ENTER}y${ENTER}" />

        <Command Name="EraseConfig" Value="" />

        <Command Name="SaveConfig" Value="" />

        <Command Name="Version" Value="" />

        <Command Name="MenuBased" Value="True" />

        <Command Name="VirtualPrompt" Value="Menu" />

        <Command Name="EnterCLIMode" Value="" />

        <Command Name="PreCommand" Value="y${CRLF}" />

      </Commands>

    </Configuration-Management

    Can you please provide the template which will work for 3com4400 switches

  • With the given template, device is not getting the configuration where the steps for download config in 3com 4400 switches are backupconfig-->save --> Enter TFTP IP Address --> Filename --> Enter

    backupConfig${ENTER}save${ENTER}${10.141.59.4}${ENTER}${NCM COnfig}${ENTER}${ENTER}"

    Configuration-Management Device="3Com SuperStack3 Family" SystemOID=" 1.3.6.1.4.1.43.10.27.4.1.2.10" AutoDetectType="BySystemOid">

      <Commands>

        <Command Name="RESET" Value="" />

        <Command Name="Reboot" Value="" />

        <Command Name="RebootAt" Value="" />

        <Command Name="EnterConfigMode" Value="" />

        <Command Name="ExitConfigMode" Value="" />

        <Command Name="Startup" Value="" />

        <Command Name="Running" Value="" />

        <Command Name="DownloadConfig" Value="system${ENTER}backupConfig${ENTER}save${ENTER}${StorageAddress}${ENTER}${StorageFileName}${ENTER}${ENTER}" />

        <Command Name="UploadConfig" Value="" />

        <Command Name="DownloadConfigIndirect" Delay="1000" RegEx="successful" Value="system${ENTER}backupConfig${ENTER}save${ENTER}${StorageAddress}${ENTER}${StorageFileName}${ENTER}${ENTER}" />

        <Command Name="UploadConfigIndirect" Delay="1000" RegEx="successful" Value="system${ENTER}backupConfig${ENTER}restore${ENTER}${StorageAddress}${ENTER}${StorageFileName}${ENTER}y${ENTER}" />

        <Command Name="EraseConfig" Value="" />

        <Command Name="SaveConfig" Value="" />

        <Command Name="Version" Value="" />

        <Command Name="MenuBased" Value="True" />

        <Command Name="VirtualPrompt" Value="Menu" />

        <Command Name="EnterCLIMode" Value="" />

        <Command Name="PreCommand" Value="y${CRLF}" />

      </Commands>

    </Configuration-Management

    Can you please provide the template which will work for 3com4400 switches

  • Ok. I was able to get it to show after removing the first line in notepad. Thanks again for getting this to work.
  • Thanks for uploading this. I tried using it, but I get issues when trying to validate. I am new to the syntax, and how this works. Any help would be much appreciated.