Shared Files for Network Configuration Manager
  • Add Switched Virtual Interfaces

    This will add switched virtual interfaces
    • 54 downloads
    • 25 Nov 2015
  • Update IP Helper on SVIs

    This template will prompt for a user specified list of SVI Interfaces and IP Helper Addresses to be assigned to those interfaces.
    • 35 downloads
    • 25 Nov 2015
  • Configure Flexible NetFlow

    This change template configures the NetFlow target on Cisco IOS Devices to Orion using Flexible NetFlow. UPDATE:  There were a few invalid characters at the end of the original file.  It's since been updated with a replacement.  If this doesn't work, then download the file, edit out the stuff at the bottom (the last character should be a curly brace in the first position) and then import manually into Config Change Templates.
    • 72 downloads
    • 8 Oct 2015
  • Update Syslog Server

    This script will configure remote logging of syslog data to match that of the Solarwinds Polling Engine assigned to nodes. The script will need to be adjusted based on existing Engine ID variables and IP Addresses for your specific environment.
    • 50 downloads
    • 25 Aug 2015
  • Configure SSH on Supported Cisco IOS Images

    This change template enables and configures SSH v2 on Cisco IOS devices running encryption compatible k9(crypto) IOS images.
    • 32 downloads
    • 19 Jun 2015
  • Configure QoS Policy on IOS Routers

    This change template configures QoS on a Single Interface on a Router.  There are three "built" QoS Policies in here (10MB, 20MB, and 1MB).  You should definitely review the Default Class Maps and the settings that I've used for the various policers, limiters, and shapers.  This is not a one-side fits all solution, but it is a good framework on which to build your own QoS Policy Template. Tested on Cisco ISR 2821 with 15.1(3)T.
    • 45 downloads
    • 16 Jun 2015
  • Cisco NX-OS Upgrade Step1

    This template is used to transfer the NX-OS image and kickstart files to Nexus switches.  It can transfer both files to multiple devices at the same time.  If you need to do one at a time, you can use this one:  Cisco Nexus (NX-OS) File Transfer NCM Template .  The script will account for any ssh or scp key prompts.  If you see errors in the Script Results, they can be ignored if they are for "yes" being sent.  It uses SCP to perform the transfer, but this can be modified.  You can add the "install...
    • 82 downloads
    • 15 Jun 2015
  • Cisco Nexus file transfer with alternate SCP/SFTP server

    This template can be used to transfer the Cisco Nexus NX-OSs to one or multiple devices at the same time using SCP.  You can replace "scp" with whatever protocol you are using, such as tftp or ftp, in the script.  This uses a Non-NCM SCP/SFTP server for the transfer.  If you use the NCM SCP/SFTP server, use this template:  Cisco Nexus (NX-OS) File Transfer NCM Template    You have to transfer the kickstart and system images separately with this one.   This one will transfer both at the same time...
    • 56 downloads
    • 11 Jun 2015
  • 3750 IOS Upgrade Using Alternate tftp server

    This template is used to upgrade the IOS on 3750s using a .tar file.  It will delete the old IOS file (.tar or .bin) if there is not enough space in flash.  It will set the boot statements and reload the device after a successful upgrade.  You will be able to view the status in Script Results when it is complete.  It will only perform the upgrade if it is a 3750 (or 2950, if altered).  If it is not the correct device type, it will skip the device.  This uses an alternate tftp server that you need...
    • 37 downloads
    • 11 Jun 2015
  • 3800 IOS Upgrade using Alternate SCP/SFTP/TFTP server

    This template is used to upgrade Cisco 3800 IOS routers.  It will delete unused IOS files from the router automatically.  It will save the current running IOS and the IOS that you are upgrading to.   This uses an an alternate scp/sftp server.  I have it setup to download the IOS using scp.  This template points to a directory (/Cisco/3800/)  on the scp server.  You will need to modify this if you are not using scp.  If you use the SolarWinds-included scp/sftp server,use this template: 3800 IOS Upgrade...
    • 36 downloads
    • 11 Jun 2015
  • 3750_IOS_Upgrade_ext_server

    This template is used to upgrade the IOS on 3750s using a .tar file.  It will delete the old IOS file (.tar or .bin) if there is not enough space in flash.  It will set the boot statements and reload the device after a successful upgrade.  You will be able to view the status in Script Results when it is complete.  This uses an external SCP/SFTP/TFTP server.  If you are using the SFTP/SCP server on your SolarWinds server , use this one: Cisco 3750/2950 IOS Upgrade(using SCP) NCM Template    You will...
    • 37 downloads
    • 11 Jun 2015
  • Cisco_6500_IOS_Upgrade_Step2 with_external_server

    I developed a series of 4 NCM config change templates to use when upgrading a 6500 with 2 supervisor modules.  All templates are named Cisco_6500_IOS_Upgrade_Step1 through Step3.  Cisco 6500 IOS Upgrade Step 1 NCM Template   This template is the third of my templates to run.  You should have run the Cisco 6500 IOS Upgrade ShowCommands NCM Template first.  It will display the variable information that is needed for this template.  This template is used to transfer the new IOS files to the 6500(s...
    • 28 downloads
    • 11 Jun 2015
  • Cisco Nexus (NX-OS) file transfer template (NON-SolarWinds server)

    This template can be used to transfer both the kickstart and image files to one or multiple Cisco Nexus (NX-OS) devices at the same time using SCP.  You can replace "scp" with whatever protocol you are using, such as tftp or ftp, in the script.  This script gives you the  option to use an external (other than the SolarWinds server) SCP/SFTP/TFTP server.  If you are using the NCM-included SolarWinds SCP?SFTP server, use this one: Cisco Nexus (NX-OS) file transfer template     I also have a folder...
    • 36 downloads
    • 11 Jun 2015
  • Cisco Nexus (NX-OS) file transfer template

    This template can be used to transfer both the kickstart and image files to one or multiple Cisco Nexus (NX-OS) devices at the same time using SCP.  You can replace "scp" with whatever protocol you are using, such as tftp or ftp, in the script.  I used the SolarWinds NPM SCP/SFTP server for the transfer.  If you want to use an external (other than the SolarWinds server) SCP/SFTP/TFTP server, use this one:  Cisco Nexus (NX-OS) file transfer template (NON-SolarWinds server)   I also have a folder...
    • 45 downloads
    • 11 Jun 2015
  • Cisco Configuration 2xxx and 3xxx twack v1

    The template was built with the intent to learn and understand NCM in a lab environment. As NCM only has a 30 day trial and after that we must purchase a dev license or use our production environment. SolarWinds Network Config Generator does almost everything NCM does for templates. What I found does not work in the generator. String Manipulation User Interactive Questions with numbers can be declared as a integer but cannot be used to add and subtract another integer of any kind. What Does work...
    • 65 downloads
    • 28 May 2015
  • Copy of Cisco 6500 IOS Upgrade ShowCommands NCM Template

    I developed a series of 4 NCM config change templates to use when upgrading a 6500 with 2 supervisor modules.  All templates are named Cisco_6500_IOS_Upgrade_Step1 through Step3.  This template is the first of my templates to run.  It will display the variable information that is needed for the other templates.  It executes a series of show commands, so that you don't have to keep logging into the switch.  The output is kept in the script results for later use.  Complete this template and proceed...
    • 24 downloads
    • 11 May 2015
  • Install Basic Security Template on selected devices

    This will install the Safe_Full configuration script on all selected devices (Vendor must be Cisco) YOU WILL NEED TO CHANGE THE VARIABLES SHOWN IN CAPS BELOW TO MEET YOUR ORGANIZATIONS NEEDS. SAFE_FULL is a security template that setups TACACS, NTP, Logging, etc. on your devices. By adjusting this script to meet your needs, you can push it out to all CISCO devices. This will help to standardize your configurations, and to verify that all device clocks are set the same, logging is occurring to the...
    • 23 downloads
    • 17 Apr 2015
  • Cisco Password and SNMPv3 Change Template

    Use this template to do a bulk change of the Cisco IOS and NX-OS passwords on your network.  If the password does not need to be changed, input the current password in that field.  The template assumes that there are separate SNMPv3 read and write credentials.  All fields can be edited or removed in the template.  Any fields that are not needed can be removed or edited.  Let me know if anyone needs help or of recommended changes.
    • 59 downloads
    • 30 Mar 2015
  • V8R18 - Dell - Port Security.xml

    Security Technical Implementation Guide Version: 8 Release: 18
    • 15 downloads
    • 25 Mar 2015
  • Enable NetFlow On Cisco ASR

    This change template configures your Cisco ASR for NetFlow export. This was verified on Cisco 2900 and ASR 1001, Software (C2900-UNIVERSALK9-M), Version 15.4(3)M1, and Version 15.3(2)S2
    • 35 downloads
    • 4 Mar 2015