This template identifies Ethernet interfaces that are operationally down and administratively up, Compares to a last change date to inventory date minus x number of days. Interface last change date is dependent on NCM inventory. Suggest running inventory when mobile users are connected.

Configure the Time Zone & Summer Time on Cisco IOS Devices     Validated on:     Cisco 2821 15.1(4)M10     Cisco 4506-E 15.2(2)E4     Cisco 3750 12.2(44)SE5 This should also work on NX-OS devices, but I'm currently unable to validate.

Turn off port-security

Port Security with Violation {Shutdown} , MAC-Sticky and Maximum 1. This will turn off and reenable Port security on selected interface with violation mode shutdown and MAC sticky and there will be 1 secure MAC-address on that particular interface. -------------------------------28947758029299 Content-Disposition: form-data; name="FileTags" HP, Procurve

This NCM template will set all passwords for all Cisco devices (IOS and NX-OS).  -------------------------------28947758029299 Content-Disposition: form-data; name="FileTags" cisco, ios, network_configuration_manager, nexus, nx-os, passwords

Change Enable Password on Cisco IOS devices

Firmware upgrade for Aruba Mobility controller

Reboot Aruba Mobility controller

Use custom variable in selected nodes to add ACL with permit and denys that have custom IP addresses. @onenode.Store is bringing in the custom property of store from selected nodes. You can change the custom property to match your setup. The ACL's are examples change to match your ACLs.

This change template configures NetFlow on Cisco IOS devices.  The template was verified on an Cisco 4500 Multilayer Switches with Supervisor IV and WS-F4531 Netflow Services Card.  Tested (F)irmware and (S)oftware revisions:  F: 12.2(20r)EW1, S: 12.2(53)SG; F: 12.2(20r)EW1, S: 12.2(54)SG1; F: 12.2(31r)SGA1, S: 12.2(53)SG; F: 12.2(31r)SGA1, S: 12.2(53)SG1; F: 12.2(31r)SGA1, S: 12.2(54)SG1

This change script removes or adds specified snmp-server RO or RW community strings on Cisco IOS devices.

Add or Change the enable password on etherwan switches

Brocade FCX Switches.  Add/Change the sFlow IP, Port, Sample Rate and Poll interval

For Etherwan Switches.  Change/Add the NTP Server and TimeZone, and set the Enable NTP command

Change Interface Description on Cisco IOS devices

This is for transferring the IOS using to an ASA using the built-in SolarWinds TFTP server.  You may have to change the system description field in the template.

This is for transferring the IOS using to an ASA using the built-in SolarWinds SCP server.  You may have to change the system description field in the template.

This will add switched virtual interfaces

This template will prompt for a user specified list of SVI Interfaces and IP Helper Addresses to be assigned to those interfaces.

This change template configures the NetFlow target on Cisco IOS Devices to Orion using Flexible NetFlow. UPDATE:  There were a few invalid characters at the end of the original file.  It's since been updated with a replacement.  If this doesn't work, then download the file, edit out the stuff at the bottom (the last character should be a curly brace in the first position) and then import manually into Config Change Templates.